Microplex SOLID 50 A3 - 3 - Print Mode Selection (Simplex;Duplex)

Panel Functions 85
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
5.11. Print Mode Selection (Simplex/Duplex)
This function allows the user to choose between simplex and
duplex printing (via the duplex unit).
(Simplex = one-sided printing, Duplex = double-sided printing).
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1 ]
  
[Paper Menu ]
[Feeder Select ]
  
[Simpl. / Dupl. ]
[Simplex ]
  
[Duplex Mode 1 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key until
[Paper Menu ] is displayed.
Press the NEXT or PREVIOUS key until
[Simpl. / Dupl. ] is displayed.
Press the NEXT or PREVIOUS key until
the desired print mode is displayed.
The duplex mode 1 is selected.
In addition this new value can be
saved as setup value (using the
SELECT key), before the printer is
turned ON LINE again.