10 Introduction
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
1.3. CE - Conformity
The manufacturer hereby declares that the device complies with the
following guidelines.
2004/108/EG (EMC directive)
2006/95/EG (Low-voltage directive)
Applied harmonized standards:
EN 55022:2006 Class A (Information technology equipment -
Radio disturbance characteristics – Limits
and methods of measurement)
EN 61000-6-2:2005 (EMC: Immunity for industrial environments)
This device produces, employs and possibly radiates high
frequency energy. Because of this, incorrect installation can
disturb radio communications.
Laser Notice
This printer is certified as a Class 1 laser product
(DHHS Department of Health and Human Services).
The laser system and printer are designed so there is never
any human access to laser radiation above a Class 1 level
during normal operation, user maintenance, or prescribed
service condition.
All handling or procedures that differ from the ones being
described in this manual are to be omitted. Disregarding might
release dangerous laser radiation.
To Next Page
Loading...
