Microplex SOLID 50 A3 - 3 - Stacker Selection

Panel Functions 83
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
5.10. Stacker Selection
This function enables the user to choose a particular stacker.
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1 ]
  
[Paper Menu ]
[Feeder Select]
  
[Stacker Select]
[Paper Tray 1 ]
  
[Paper Tray 2 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key until
[Paper Menu] is displayed.
Press the NEXT or PREVIOUS key until
[Stacker Select ] is displayed.
Paper Tray 1 = Current default.
Press the NEXT or PREVIOUS key until
the selected Paper Tray (e.g. Paper
Tray 2) is displayed.
Paper Tray 2 is selected.
In addition this new value can be
saved as setup value (using the
SELECT key), before the printer is
turned ON LINE again.