Microplex SOLID 50 A3 - 3 - Page 28

28 Installation
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
- Please note the following environment conditions are needed
to operate the printer at full capacity:
Temperature: +5°C (41°F) to +32°C (90°F)
Relative atmospheric humidity: 15% to 85%
- Do not expose the printer to abrupt temperature changes
(heating, window or air conditioning).
- The printer should not be exposed to direct sunlight.
- Required space:
Fig. 2.4.a Required space for the SOLID 50 A3 - 3 (printer with optional
cassette 3+4)