Handling of Consumables 47
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
5. Use the handle to pull the old toner cartridge straight out, and
place it on a suitable site.
6. Clean the printer (see chapter 6).
7. Take the new toner cartridge out of its packing.
Fig. 3.2.d Taking the new toner cartridge out of its packing
8. Turn the cartridge so that the handle is on top.
9. Shake the cartridge vigorously in all directions (as shown in
figure 3.2.e) to distribute the toner.
If toner spills on the floor, do not clean it up using a vacuum or a
wet cloth. Wipe up the spill with a dry cloth. If toner gets on
clothing, be sure to wash the clothing in cold water.
To Next Page
Loading...
