Microplex SOLID 50 A3 - 3 - Page 68

68 Operation and Menu Structure
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
[Save as Setup?]
Pressing the INFO key the displayed function value is confirmed
respectively the displayed function is activated. (As an alternative the
SELECT key can be used as well; compare description above.)
The changes are saved temporay. (This means, the changes are saved
only until the next printer power off).
After this you have to decide, if you want to save the changes
permanent (Save as setup).
To select such changes permanently, the user must press the
INFO key or the SELECT key one more time. These permanent changes
in printer configuration are active each time the printer is turned on
again.
If the MENU key is pressed instead, the changes are only stored
temporary (not saved as setup). (This key takes the user to the
respective previous menu level).