Microplex SOLID 50 A3 - 3 - Page 75

Panel Functions 75
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
Remarks on choosing print resolution (Fonts):
By selecting 300 dpi resolution the printing system will be
compatible for all applications (300 dpi data stream), also the
300 dpi font banks (bitmap writing) are available.
If 600 dpi resolution is chosen, the corresponding fonts must
be loaded into the printer server (e.g. True Type fonts, scalable
download fonts).