OM-278680 Page 67
SECTION 13 − RECONFIGURING STANDALONE
ROUTER FOR CLASSROOM MODE
Turn on the router.
No Ethernet connections are needed.
Be sure power is disconnected
from all other AugmentedArc
routers in the facility.
From a PC, connect to the
AUGMENTED-ARC wireless network.
Network may not be available for several
moments after turning on the router,
Open a web browser and
enter http://dlinkrouter.local/
as the IP address.
D-Link configuration page loads.
Log into the router.
User Name: admin
Password: AUGMENTEDARC (all caps)
Click Login.
Click Advanced.
Uncheck Enable DHCP Server Box.
Select Save Settings.
Reconfiguring
the router is normally not
required. Reconfigure the router only when
instructed by Miller technical support.
STANDALONE
ROUTER
Click LAN Setup.
To Next Page
Loading...
Need help?
General
