OM-278680 Page 42
SECTION 9 − USING THE TEACHER SOFTWARE
9-1. Installing The Teacher Software Program
Download the teacher software from the Miller website at https://www
.millerwelds.com/aasoftware
Computer requirements:
Windows 7 (64 Bits), Windows 8 (64 Bits), Windows 10 (64 Bits)
Processor: 2.2GHz 3MB
RAM: 4GB
Graphic Board: 2GB VRAM DirectX 9 compatible graphics card
NVidia GeForce 750 or better
GeForce 900 Mobile series or better
AMD Radeon HD 6000 series or better, or Radeon HD 7000 Mobile series or better.
Display (min): 1366 x 768
Hard Drive: 1GB
Installation Procedure
Double-click the AugmentedArc_TeacherSoftware installation file. The installation setup window appears (Figure 9-1) and the installation
automatically begins. When the process is completed (Figure 9-1), click Finish.
Continue with the installation process, including the license agreement screen. A Teacher Software shortcut and a shortcut on the Windows
taskbar will be created (Figure 9-2). Click Finish.
.Figure 9-1. Teacher Software Installation Screens
.Figure 9-2. Teacher Software Shortcut Icon
If using a router, connect the computer running the Teacher Software to the AUGMENTED−ARC network (Figure 9-3). If using the internal
Access Point (see section 8-2G), connect the computer to the AugmentedArc_XXXXXXXXX network (Figure 9-3), where the Xs are the serial
number of the simulator (i.e. AugmentedArc_MK123456D). When prompted for the network security key, enter
augmentedarc
.
To Next Page
Loading...
Need help?
General
