MIMAKI CJV150-107 - Chapter 6: Warning and Error Messages; Errors During Operations; Messages Displayed in LOCAL Mode

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.3.8 P.1
1
2
3
4
5
6
7
8
R.1.0
4.3.8 Positioning of the Wiper Drive Link
 Outline
Adjust the position of the wiper drive link.
 Procedure
1. After setting the clearance between the motor base and the wiper
drive link at 0.5 mm, check whether the wiper moves smoothly.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Wiper Drive Link
0.5 mm
MAINTENANCE MANUAL > Adjustment Items > Mechanical Adjustment > Positioning of the Wiper Drive Link
Model CJV150/300 Issued 2014.09.15 Revised F/W ver. 1.00 Remark
1.0
Rev.