MIMAKI CJV150-107 - 5.1.27 FEED TEST 10 m

© 2014 MIMAKI ENGINEERING CO.,LTD.
5.1.27 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Test Items > Test Function > FEED TEST 10m
Model
CJV150/300
Issued
2014.09.15
Revised F/W ver. Remark
1.0
Rev.
5.1.27 FEED TEST 10m
 Function
A 10 m test pattern is cut then the displacement or the like, which may occurs when a long sheet is cut, is checked.
Cutting conditions:
• Speed: 20cm/s or more
• Pressure: 100 g or less
• Offset: 0.30 mm
 Operating procedure
1. Set a cutter to the holder.
2. Select [#TEST(CUT)] -> [&FEED TEST 10m].
Execute with the [ENTER] key.
The cutting size is only different from “FEED TEST 2m (5.1.26)”.
10 m
Drawing origin
Front