MIMAKI CJV150-107 - 5.1.12 CHECK ENCODER

© 2014 MIMAKI ENGINEERING CO.,LTD. 5.1.12 P.1
1
2
3
4
5
6
7
8
R.1.0
5.1.12 CHECK ENCODER
 Outline
Checks the operation of the linear encoder and the motor encoder by moving the slider.
 Content
“M: xxx E: xxx” is displayed on the lower row of the LCD. The coordinate value of the motor encoder is displayed in
M, and that of the linear encoder is displayed in E in units of mm.
With[][]key, you can move the slider to right and left.
MAINTENANCE MANUAL > Test Items > Test Function > CHECK ENCODER
Model CJV150/300 Issued 2014.09.15 Revised F/W ver 1.00 Remark
1.0
Rev.