MIMAKI CJV150-107 - 6.4.10 Absorption Fan Assy.

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.4.10 P.1
1
2
3
4
5
6
7
8
6.4.10 Absorption Fan Assy.
 Work procedures
1. Remove the Platen cover F, R.
2. Remove the Rear fan duct by lifting it obliquely.
3. Remove the screws with a ratchet or stubby screwdriver,
disconnect the connector and remove the Absorption fan assy.
4. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF.
It is very dangerous if sleep mode functions mistakenly during the operation.
Absorption fan Assy x3
Rear fan duct
Absorption fan Assy
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > Absorption Fan Assy.
Model CJV150/300 Issued 2014.09.15 Revised F/W ver 1.00 Remark
1.0
Rev.