MIMAKI CJV150-107 - Chapter 3: Setting Media Display Options; Media Residual Display Setting; Media Detection Settings; Chapter 3: Setting Language

© 2014 MIMAKI ENGINEERING CO.,LTD.
3.2.5 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Workflow > Driving Parts > Replacement the GR Roller Assy
Model
CJV150/300
Issued
2014.09.15
Revised F/W ver. Remark
1.0
Rev.
3.2.5 Replacement the GR Roller Assy
 List of replacement procedures
Item Work operation Description Ref.
Covers
1.

Removal of covers, etc. Remove the platen cover R-C-160 and platen cover 160-C-
2.
6.1.1
GR Roller
Assy
2. 
Removal of the GR roller assy. Remove the GR roller assy. 6.3.11
3.

Mounting of the GR roller assy. Mount the GR roller assy.
Check
4. 
Check on the surface of the platen When the clearance between the head and the platen is not
stabilized and printed image is affected by that, adjust the
flatness of the platen.
Adjustment
5.

GR/PR adjustment Make the machine recognize the positional relationship
between the grid rollers and pinch rollers.
4.2.25
Covers
6. 
Mounting of the covers Mount the covers that have been removed.
Install all the covers temporarily first and then secure them
in order, starting with the one nearest one end.
Install the covers while pushing the pre-heater down.
(To ensure the space for the pick up chamber and to prevent
the covers from rising above the grid rollers)
6.1.1
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you
touch the ink.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
GR Roller Assy