MIMAKI CJV150-107 - Chapter 4: Print & Cut with Registration Marks; TP OFFSET Adjustment; Chapter 4: Setting the Scale Adjust

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.2.12 P.1
1
2
3
4
5
6
7
8
R.1.0
4.2.12 DEALER No.
 Outline
Check and set the dealer No.
For dealer No., 8-digit alphameric characters (0 to 9, A to Z) can be input.
 Procedures
1. Select [#ADJUST] - [DEALER No.].
2. Input (check) the dealer No.
[]/[] : Changing value
[]/[] : Moving cursor
(When the cursor is at the right end or the left
end, even if the key is pressed, it does not
move.)
[ENTER] : Confirmation
[END] : Cancel
FUNCTION
#ADJUST [ENT]
#ADJUST
DEALER No. [ENT]
#DEALER No.
D/N 10000000
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > DEALER No.
Model CJV150/300 Issued 2014.09.15 Revised F/W ver. 1.00 Remark
1.0
Rev.