© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.1 P.2
6.2.1 Damper
1
2
3
4
5
6
7
8
7. Remove the damper.
8. Perform the assembly by reversing the disassembly procedure.
9. Perform [HEAD WASH / FILLUP] and fill ink in the damper.
Perform vacuum absorption -> valve release -> normal cleaning
automatically.
Do not mess up the orders of ink tube tag.
(Confirm "1.3.1 Configuration" )
#ADJUST
#HEAD WASH [ENT]
#HEAD WASH
FILLUP [ENT]
FILLUP
START [ENT]
[END]
** FILL UP **
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Damper
Model
CJV150/300
Issued
2014.09.15
Revised F/W ver
1.00
Remark
1.0
To Next Page
Loading...
