© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.11 P.2
6.2.11 Clamp Assy.
1
2
3
4
5
6
7
8
5. Reverse the disassembly procedure for reassembly.
When mounting the clamp assy., place the front
right and left hooks on the PR guide and mount it
horizontally so that the right and left cam holder
hooks can be placed in the groove of the clamp
assy.
For easy work, set clamp pressure to Low by man-
ual operation and lower the clamp lever.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Clamp Assy.
Model
CJV150/300
Issued
2014.09.15
Revised F/W ver
1.00
Remark
1.0
To Next Page
Loading...
