© 2014 MIMAKI ENGINEERING CO.,LTD.
6.3.11 P.2
6.3.11 GR Roller Assy
1
2
3
4
5
6
7
8
3. Remove the Bearing holder C-Assy. at the right end of the
shaft (screw x2) and remove the GR roller assy.
4. Reverse the disassembly procedure for reassembly.
GR roller Assy
Bearing holder C-Assy
PF coupling C
Bearing holder C-Assy
PF coupling C
Roll collar
Screw in while pushing this.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > GR Roller Assy
Model
CJV150/300
Issued
2014.09.15
Revised F/W ver. Remark
1.0
To Next Page
Loading...
