MIMAKI CJV150-107 - Chapter 3: Information Menu Table; Chapter 3: Displaying Machine Information

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.2.1 P.3
4.2.1 AVERAGING 34 ADJUST
1
2
3
4
5
6
7
8
2. Loosen the screws (x3) for fixing of the adjusting head.
3. Referring to the Step 1, move the adjusting lever to adjust the
slant of the head.
4. Fix the screws (x3) of the adjusted head.
5. Repeat the common procedure 2 and the slant adjustment
procedures 1 to 4 until you can adjust.
6. Move the adjusting lever to the left edge.
Screw (1)
Screw (3)
Screw (1)
Screw (2)
Screw (2)
Screw (3)
Adjusting lever
(for Head 1)
Adjusting lever
(for Head 2)
Loosen the screws before adjustment in the order of
(1), (2) and (3).
Fix the screws after adjustment in the order of (1), (2)
and (3).
To the left
R.1.0
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > AVERAGING 34 ADJUST
Model CJV150/300 Issued 2014.09.15 Revised F/W ver. 1.00 Remark
1.0
Rev.