MIMAKI CJV150-107 - Chapter 4: Setting the DIVISION CUT (X-direction)

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.2.6 P.2
4.2.6 CAPPING
1
2
3
4
5
6
7
8
4. Make adjustment so that the clearance between the head and
uppermost point of the cap is set at 1 mm.
[]/[]: Shifts the cap.
[ENTER]: Finalizes (To Next)
#CAPPING
FlushingPOS= 2.0
1mm
R.1.0
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > CAPPING
Model CJV150/300 Issued 2014.09.15 Revised F/W ver. 1.00 Remark
1.0
Rev.