Chapter 4 Maintenance
4-15
8
Take washing liquid in a dropper and fill the cap with it until it is full.
• Fill the cap with washing liquid until it is about to overflow.
9
Press the [ENTER] key.
• This will clean the nozzles.
• The head moves when nozzle cleaning is complete.
00 : 00
PLEASE WAIT
PLEASE WAIT
**CLEANING**
10
Take washing liquid in a dropper and fill the cap with it until it is full.
• Fill the cap with washing liquid until it is about to overflow.
11
Press the [ENTER] key.
• After the initial operation, the display returns to Step 2.
• If the device is not going to be used (output) for a long period of time, a small amount of ink must be
discharged periodically (flushing) to ensure stability in discharge of ink.
• Turn off only the front power button after executing the cleaning function for storage. Keep the main
switch on the right side turned on (|) and keep the socket plugged in.
4
To Next Page
Loading...
