MIMAKI JFX200-2513EX - Page 136

Chapter 4 Maintenance
4-26
3
Press the [ENTER] key to start printing.
• The nozzle pattern is printed.
• When you select [ENTRY] in Step 2, the machine moves to the nozzle line selection step (Step 5)
without printing the nozzle pattern.
**PRINT**
PLEASE WAIT
• Nozzle pattern
H1-AH2-DH2-CH2-BH2-AH3-DH3-CH3-BH3-AH1-DH1-CH1-B
4
Press to select the nozzle line that needs nozzle recovery, and press the [ENTER]
key.
SELECT NOZZLE
: H1 - A
Head No.: H1 to H3
Nozzle line: A, B, C, D
5
Register the nozzle number that needs nozzle recovery, and press the [ENTER] key.
H1-A
No. 1 : 184
Registration No.: 1 to 10
Recovery nozzle No.
(1 to 320) or OFF
(1) Press to select the registration number (from 1 to 10), and press the [ENTER] key.
(2) Press to register the nozzle number that needs recovery, and press the [ENTER]
key.
• Example of registration of nozzle for recovery
Nozzle
missing
No. 128
Nozzle
clogging
No. 184
Nozzle
clogging
No. 16
Nozzle
clogging
No.
Registration No. Recovery nozzle No. Status
1 16 Target for nozzle recovery
2 128 Target for nozzle recovery