Chapter 1 Before Use
1-21
5
Use a fastening jig to close the specialized cap.
Fastening jig
Align with each other the
arrows shown on the
fastening jig
• Tighten the fastening jig until the arrows shown on it get aligned with each other.
• Do not tighten the specialized cap too much. Doing so may damage it.
6
Turn the bottle upside down to make sure that the ink does not leak.
• Do not leave the ink bottle with the specialized cap attached in a location where it is exposed to light
for a long period of time. Doing so may cause the ink inside the bottle to harden.
1
To Next Page
Loading...
