MIMAKI JFX200-2513EX - Page 85

Chapter 3 Convenient Usage
3-17
12
Press to set the [SPOT].
• AUTO:
Patterns are set automatically depending on the printing conditions.
• PATTERN 1 to 5:
The pattern that you select is printed.
SPOT >
PATTERN: 1
<
13
Press the [ENTER] key.
• A screen for setting [SMOOTHING LV.] is displayed.
SPOT
SMOOTHING LV.: AUTO
><
14
Press to set the [SMOOTHING LV.].
• AUTO:
Smoothing level is set automatically according to the printing conditions.
• 5 to 100%:
The effects of MAPS2 grow stronger when the value is increased and weaker when it is
decreased.
SPOT
SMOOTHING LV.: 50%
><
15
Press the [END] key, and then press .
• A screen for setting [CLEAR] is displayed.
CLEAR
PATTERN: AUTO
<
16
Press to set [CLEAR].
• AUTO:
Patterns are set automatically depending on the printing conditions.
• PATTERN 1 to 5:
The pattern that you select is printed.
CLEAR
PATTERN: 1
<
17
Press the [END] key, and then press .
• A screen for setting [TYPE/LV.] is displayed.
CLEAR
TYPE/LV.: AUTO
<
3