When Nozzle Clogging Cannot Be Solved
4-23
1
1
1
4
Routine Maintenance
Check the print condition for which nozzle recovery cannot be performed
Depending on the nozzle registered, there is the mode not reflected by “RECOVERY”.
Check the unrecoverable print conditions with the check function.
1
Select [NOZZLE RECOVERY] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [NOZZLE RECOVERY].
(4) Press the key.
2
Select the [CHECK] by pressing key.
Then press key.
3
Press the key.
• The mode for which nozzle recovery is invalid is displayed.
• If there is no mode for which nozzle recovery is invalid, “NONE” is
displayed.
4
Press the key several times to end the setting.
• If there are many registered nozzles, it takes time to display the check result.
To Next Page
Loading...
