MIMAKI SWJ-320 S2 - Page 110

When Nozzle Clogging Cannot Be Solved
4-24
Clear the set value
1
Select [NOZZLE RECOVERY] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [NOZZLE RECOVERY].
(4) Press the key.
2
Select the [RESET] by pressing key. Then
press key.
3
Press the key.
4
Select the Nozzle line that needs clear the setting
value by pressing key. Then press
key.
5
Press the key.
6
Press the key several times to end the setting.
NOZ Z L E RECOVERY
:RESET
SELECT RESET NOZZLE
:H1-A
SELECT RESET NOZZLE
:H1-A
H1 - A RESET?
EXECUTE [ ENT ]