5-6
Message displayed in LOCAL
Message Cause Solution
Time to replace the wiper in the capping
station with a new one has come.
(The wiping count has reached the
specified value.)
Press the key and replace the
wiper with a new one.
( P.4-27)
Data has been received.
Execute the printing by pressing
key. Or, execute the data clearing.
The ink of ink bottle became less. Note that the ink end will be soon.
Ink in current use expired. Prepare new ink bottle.
Ink in current use expired. Replace it with new ink bottle.
The charged ink became none. Perform ink charge. ( P.1-11)
The ink could not be supplied to the
sub-tank.
Check the ink bottle. If the inkbottle is empty,
replace it with a new one, and press key. If
the same error message appears again, con-
tact your local distributor to call for service.
There became no media. Replace it with new one.
Ink consumption status inside the sub
tank is abnormal.
(There is a possibility of discharging
defect.)
• Perform "CLEANING(HARD)" or "INK
PURGE".
( P.2-25) ( P.4-14)
• If the message is displayed repeatedly even if
you performed above many times, contact
your local distributor to call for service.
To Next Page
Loading...
