iii
Displaying the Information ..............................................3-22
Displaying the Information of this machine .....................3-23
Chapter 4 Maintenance
Maintenance ..................................................................... 4-2
Precautions for Maintenance ............................................4-2
About Cleaning Solution ...................................................4-2
Cleaning the Exterior Surfaces .........................................4-3
Cleaning the Platen ..........................................................4-3
Cleaning of after heater cover and pre heater cover ........4-3
Cleaning the Media Holder ...............................................4-4
Maintaining the Capping Station ....................................... 4-5
Cleaning the Wiper and Cap .............................................4-5
Washing the Ink Discharge Passage (DISWAY WASH) ..4-8
When the Machine Is Not Used for a Long Time
(CUSTODY WASH) ..........................................................4-9
Cleaning the Ink Head and the Area around It ............... 4-12
When Nozzle Clogging Cannot Be Solved ..................... 4-14
Ink purge .........................................................................4-14
Washing of Head nozzle .................................................4-16
Alternative nozzles for printing, when nozzles missing
can not be improved ..................................................................4-18
Automatic Maintenance Function ................................... 4-25
Setting the Refreshing Intervals ......................................4-25
Setting the Cleaning Intervals .........................................4-26
Replacing consumables .................................................. 4-27
Replacing the wiper ........................................................4-27
Replace the waste ink tank with another ........................4-28
Replacing the fan filter ....................................................4-29
Chapter 5 Troubleshooting
Troubleshooting ................................................................ 5-2
Power does not turn on .....................................................5-2
The machine does not start printing .................................5-2
Media get jammed / media is soiled .................................5-3
Image quality is poor .........................................................5-3
Nozzle is clogged ..............................................................5-4
When media heaves up at feeding ...................................5-4
Warning / Error Messages ................................................ 5-5
Warning messages ...........................................................5-5
Error messages ................................................................5-8
To Next Page
Loading...
