MIMAKI UJV500-160 - Charging Ink

3-48
Charging ink
If auto charging is not possible, or if you want to check the content of the IC chip before charging ink, perform
the following operation.
1
Press the key in LOCAL.
2
Press to select [MAINTENANCE].
3
Press the key.
4
Press to select [CHARGE INK].
5
Press the key.
6
Press to select the ink bottle to be
charged.
7
Press the key.
• If the selected ink bottle is near its expiration date, a confirmation screen will appear. If OK,
press .
• The selected bottle cannot be charged an either of the following situations. ( P.3-53)
(1) The volume of remaining ink managed by the printer is 100%.
(2) The ink expiration date has passed by 2 months or more.
FUNCT I ON
SETUP [ ENT [
FUNCT I ON
MA I N T ENANCE [ ENT [
MA I N T ENANCE
STAT ION [ ENT ]
MA I N T ENANCE
CHARGE I NK [ ENT [
CHARGE I NK
SELECT : BOTTLE 1 - M
CHARGE I NK
SELECT : BOTTLE 1 - M
Exp i r a t i on
CHARGE ANYWAY ?
Exp i r a t i on
NO < > YES
Displayed
alternately
Exp i r a t i on : 1MONTH
CHARGE ANYWAY ?
Exp i r a t i on : 1MONTH
NO < > YES
Displayed
alternately