3-21
1
1
3
Convenient use
5
6
Machine Settings
Machine settings are functions for using this machine easily.
The following items can be set in Machine settings.
Item Set value Default Meaning
AUTO Power-off
(P.3-23)
NONE/ 10 ~ 600min NONE
When no operation has been performed for
the set time, the power supply is
automatically turned “OFF”.
Feeding/
Tak eUp
( P.3-24)
FEED ON / OFF OFF
Set whether you use the take-up/ feeding
unit or not. When you print on the leaf media
or you want to use the take-up unit only,
perform setting of Feeding and TakeUp
separately.
ROLL ON / OFF OFF
MEDIA REMAIN
(P.3-25)
ON / OFF OFF
You can control the remaining amount of
media.
TIME SET
( P.3-27)
+4h ~ -20h
Japan time
Time difference is corrected.
UNIT
(P.3-28)
TEMP.
°C (Centigrade)
/°F (Fahrenheit)
°C A unit for displaying temperature is set.
LENGTH mm / inch mm A unit for displaying length and area is set.
KEY BUZZER
(P.3-29)
OFF / ON ON
A buzzer sound when keys are pressed is
set.
MEDIA DETECT
( P.3-31)
THICKNESS
DETECT
AUTO/MANUAL AUTO
When you enter any media thickness at
setting the media or when the media
thickness sensor has an error, set this to
“MANUAL”.
MEDIA
DETECT
(P.3-31)
WIDTH
DETECT
AUTO/MANUAL AUTO
When you enter any media width at setting
the media or when the media width sensor
has an error, set this to “MANUAL”.
THICKNESS
DETECT
AUTO/MANUAL AUTO
When you enter any media thickness at
setting the media or when the media
thickness sensor has an error, set this to
“MANUAL”.
DRYING
FEED
( P.3-32)
OFF/100 to 1000mm OFF
To dry evenly up to the back edge of the
printing data, set the length to be fed after
printing has been completed.
BACKWORD
FEED
ON/OFF ON
SPACE BTWN PP. ( P.3-33) OFF/10 to 500mm
OFF
Setting the amount of blank space between
printed lines.
NETWORK
& MAIL
NETWORK
(P.3-34)
Set the network.
IP
Address
The IP address currently used by this machine is displayed.
MAC
Address
The IP address currently used by this machine is displayed.
DHCP ON / OFF
When it is ON, the IP address given by the
DHCP server is used.
AutoIP ON / OFF
When it is ON, the IP address is determined
by the AutoIP protocol. However, DHCP is
ON, DHCP has priority.
IP
Address
*1
Set the IP address used by this machine.
Def.
Gateway
*1
Set the default gateway used by this machine.
DNS
Address
*1
Set the DNS server address used by this machine.
SubNet
Mask
*1
Set the digit number of the subnet mask used by this machine.
Mail
Deliverry
ON / OFF OFF
Set whether you send/ do not send the e-
mail when the set event occurs.
To Next Page
Loading...
Need help?
General