MIMAKI UJV500-160 - Head Cleaning; About Head Cleaning; Perform Head Cleaning Depending on the Test Printing Result

2-32
Head Cleaning
About head cleaning
Check the printed test pattern result and perform cleaning depending on the status.
Select one from the three types below:
SOFT : When lines are bent, when any line is missing
NORMAL : When any line is missing, when colors are mixed
HARD : When poor image quality cannot be improved even by NORMAL or SOFT cleaning
Perform head cleaning depending on the test printing result
There are three types of head cleaning. Use one by checking the test pattern.
1
In Local, Press the key twice.
2
Press to select the cleaning type.
SOFT : When lines are bent, when any line is missing
NORMAL : When any line is missing, when colors are mixed
HARD : When poor image quality cannot be improved even by NORMAL or SOFT cleaning
3
Press the key.
4
Press to select a head to cleaning.
• Set Value : 12 (Cleaning all heads.)
1_ (Head of Group 1)
_2 (Head of Group 2)
CLEAN I NG
SOFT [ ENT ]
CLEAN I NG
NORMAL [ ENT ]
SELECT HEAD
:12
SELECT HEAD
:1_
Rear side
of machine
Head1
Group 1 Group 2
Head5
Head3
Head2
Head6
Head4