4-28
Cleaning Y motor
When the warning message [Y motor cleaning] is displayed, clean the Y motor with the procedures below:
1
Turn off the power supply, and open the Y-motor
maintenance cover.
• Remove the screw of the Y-motor maintenance cover, and
open the cover.
2
Open the cover for absorbing abrasion powder,
and absorb abrasion powder accumulating in the
hole for absorbing abrasion powder with a
vacuum.
• Using a flat-blade screwdriver, open the cover.
3
Return the cover for absorbing abrasion powder to the original status, and turn on
the power supply.
• Warning message [Y motor cleaning] is displayed on the screen.
4
Press the key and clear the warning message.
• The machine returns to LOCAL.
• Do not remove the cover indicated with circles in the right
figure. It may cause the operation defect of the motor.
To Next Page
Loading...
