MIMAKI UJV500-160 - Turning the Power ON;OFF; Turning the Power on

2-3
1
2
Basic Operations
4
5
6
Turning the Power ON/OFF
Turning the Power ON
1
Turn the main power switch ON.
• Set the main power switches located on the side of this
machine to the “I” side.
2
Push the power button.
• Push the power button located on the operation panel.
• The firmware version is displayed when the power is turned ON.
• The machine performs its initial operation.
3
The machine enters LOCAL.
4
Turn ON the power of the connected PC.
• Turn the power ON after the front cover and maintenance cover are closed.
• Always make the main power switch ON. If you leave it OFF, it may cause nozzle clogging of the
head. In some cases, recovery may become difficult.
Main power
switch
Power button
UJV500 St a r t - up
Ve r 1 . 00
<LOCAL>