MIMAKI UJV500-160 - Rear Side and Right Side of the Machine

Names of Parts and Functions
1-5
1
Before Use
3
4
5
6
Rear Side and Right Side of the Machine
AC inlet
Connect the power cable to the AC
inlet.
Clamp lever (rear)
Interlocks with the clamp
lever in the font of this
machine.
Main power switch
Turns on/off the main power for this
machine. Leave the main power turned
on to prevent ink clogging.
Roll holders
Putting this into the paper core (right and left)
of a narrow roll medium (less than 1m), hold
the medium. It supports the paper core of 2
inch and 3 inch.
USB 2.0 connector
This is USB2.0 interface
connector.
LAN connector
Please use this connector when
you use event mail function.