MIMAKI UJV500-160 - Ink Specifications; Supply Item List

Specifications
6-3
Appendix
6
Ink specifications
Supply item list
Weight
Printer main unit 800 kg
External ink supply
unit
30 kg
Outside dimen-
sions
*5
Printer main unit 3830 mm(W) x 1930 mm(D) x 1700mm(H)
External ink supply
unit
777 mm(W) x 570 mm(D) x 830mm(H)
*1. Without deflection of the roll when it is retained at both ends.
*2. “Involuted” for the media take-up direction is recommended.
*3. 65.1dB(A), Operating Condition: Full load Measuring Method: According to clause 1.7.4.2 of Machinery Directive 2006/42/EC
*4. Main unit and heater included.
*5. When take-up machine/ feeding machine are flat
Item Specifications
Supply 1L Ink bottle
Color
Black ink
Cyan ink
Magenta ink
Yellow ink
Light Cyan ink
LightMagenta ink
White ink
Ink capacity 1 liter
Shelf life
The period is printed on the ink bottle.
Within three months after opening the package even in the available period.
Storage tempera-
ture
Storage 5 to 30˚C
Transportation
1 to 60˚C (Storage at temperature of 60˚C is only permitted within 120 hours, and
at temperature of 40˚C is permitted within a month.)
 Do not disassemble the ink bottle.
 Ink could freeze if kept in a cold place for an extended period.
• If the ink freezes, thaw it at room temperature (25°C) spending more than three hours before
use.However, when you use the frozen ink, the printing quality becomes degraded due to altered
ink. Store ink in the environment where ink may not freeze.
Product No. Name Product
No.
Name
LUS20-C-BA LUS-200 Cyan ink (1liter) SPA-0192 Cutter blades
LUS20-M-BA LUS-200 Magenta ink (1liter) SPA-0193 Wiper kit
LUS20-Y-BA LUS-200 Yellow ink (1liter) SPA-0195 Air pressure filter
LUS20-K-BA LUS-200 Black ink (1liter) SPA-0196 Ink filter white (for Extternal ink supply unit)
LUS20-W-BA LUS-200 White ink (1liter) SPA-0197 Waste ink tank
I-LUS15-C-BA-1-UA LUS-150 Cyan ink (1liter) SPA-0211 Air pressure filter kit
I-LUS15-M-BA-1-UA LUS-150 Magenta ink (1liter) SPA-0214 Washing bypass tube jig kit
I-LUS15-Y-BA-1-UA LUS-150 Yellow ink (1liter) SPA-0219 F absorber kit
I-LUS15-K-BA-1-UA LUS-150 Black ink (1liter) SPA-0220 Air purge jig UJV
I-LUS15-LC-BA-1-UA LUS-150 Light cyan ink (1liter) SPA-0222 Post cure lump (1pc. Included)
I-LUS15-LM-BA-1-UA LUS-150 Light magenta ink (1liter) SPC-0690 Post cure lump (3pc. Included)
I-LUS15-W-BA-1-UA LUS-150 White ink (1liter) SPA-0223 CAP absorber UJV kit
SPA-0188 Maintenance kit
SPC-0527
Clean stick for the surroundings of
the head 50pcs
SPA-0189 Carriage filter
SPA-0190 Mist filter SPC-0568 Cleaning liquid for maintenance
Item Specifications