MIMAKI UJV500-160 - Setting a Roll Media

2-7
1
2
Basic Operations
4
5
6
Setting a Media
Setting a roll media
Prepare for the take-up device first
Prepare for the take-up device before setting the roll media.
1
Remove the roll shaft on the take-up device at the front of this machine.
(1) Loosen the cover fixing screw attached to the cover of right/ left of take-up device and unlock the
AMF lock by sliding it.
(2) Open the covers.
(3) Remove the roll shaft.
• When the weight of the roll media is added, the roll
shaft becomes very heavy. (The roll shaft alone
weighs 8.5kg.) Handle it with care. To avoid an
accident or injury, be sure to grip the handles on
both ends.
Handle
Roll shaft
Cover fixing
screw
AMF lock