About installing this machine
1-3
1
Before Use
3
4
5
6
About fixing machine
The leg of this machine has the level foot to fix the machine.
Before turning the power ON, make sure that the printer body is fixed with the leveling feet. The printer body
may start moving during operation if it is not fixed with the leveling feet.
Moving This Machine
• Put the supplied iron base plate (gray) between each leveling foot and the floor. To hold the weight of
the printer, using plate is recommended.
• When the machine is moved to any place other than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may occur.
Be sure to request your distributor or our service office to move this machine.
To Next Page
Loading...
