Automatic Maintenance Function
4-27
1
1
1
4
Routine Maintenance
Setting the Cleaning Intervals
The cleaning type and the interval between each cleaning operation are set.
1
Select [AUTO MAINT.] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [AUTO MAINT.].
(4) Press the key.
2
Press to select [CLEANING].
3
Press the key.
4
Press to set the interval between each
cleaning operation.
• Set value : OFF, Lv.1, Lv.2, Lv.3
• As the LEVEL increases, the interval between each operation gets shorter.
5
Press the key.
• When you set other than “OFF” in the Step 4, the cleaning type
selection screen is displayed.
6
Press to select a cleaning type.
• Set value : NORMAL, SOFT, HARD
7
Press the key.
8
Press the key several times to end the setting.
About white ink circulation function
This machine performs ink circulation automatically to prevent white ink pigment from settling out.
Display indication during white circulation operation
• White ink circulation function is performed automatically only when you use 4 colors + white ink set.
• Even if you perform white circulation, ink is not consumed.
• When this machine does not perform the printing operation etc., white circulation is performed once one hour.
• If you stop white circulation on the way, press the key.
• When white circulation operation has been completed, the display returns to the status before starting white circulation.
• When the machine receives printing data during white circulation, it stops white circulation and the
display returns to the status before starting white circulation.
To Next Page
Loading...
