Refilling antifreeze mixed water
4-45
1
1
1
4
Routine Maintenance
Refill antifreeze mixed water
If an error of lack of water, refill antifreeze mixed water. To fill up its capacity, about 200cc refill is required.
1
Made mixed water (antifreeze liquid: 1, water: 2) in
the attached reservoir and move it to the attached
syringe.
2
Remove the cover of the left rear surface of the
machine.
• Remove the screw indicated with circles in the figure and
remove the cover.
3
Uncover the feed-water inlet and the air vent.
4
Refill antifreeze mixed water.
• Fill the antifreeze mixed water from the feed-water inlet.
• Fill it up seeing the water gauge on the back of this machine.
Displaying red on the water gauge indicates full.
5
Close the feed-water inlet and the air purge cover, and attach the cover of the left
rear surface of the machine.
• Be aware that if you put in too much antifreeze mixed water, it may leak from the cooling
water tank.
To Next Page
Loading...
