1-2
About installing this machine
Where to Install This Machine
Secure a suitable installation space before assembling this machine.
The place of installation must have enough space for not only this machine itself, but also for the printing
operation.
Working Environmental Temperature
Use this machine in an environment of 20 to 30°C to ensure reliable printing.
The heater temperature may not reach the set value, depending on the ambient temperature.
Model Width Depth Height Gross weight
UJV500-160
3850mm
1930mm
*1
*1. When the VTTS is attached
1700mm
800kg
External ink supply unit 780mm 570mm 830mm 30kg
• If the place to install the machine is exposed to strong sunlight around the window, draw a curtain to
prevent the machine from being exposed to strong sunlight.
To Next Page
Loading...
