MIMAKI UJV500-160 - Workflow

2-2
Workflow
1
Turning the Power ON/OFF
2
3
Setting a Media
5
Preparing for the Heaters
7
Test Printing
Set the media feeding
Referring to “Turning the Power ON/OFF”
( P.2-3).
Referring to “Setting a Media” ( P.2-5).
Referring to “Preparing for the Heaters”
(P.2-28).
Referring to “Test Printing” ( P.2-30).
Referring to “Set the media feeding” ( P.2-
34).
9
Correct the ink drop position for
bidirectional printing
Referring to “Correct the ink drop position for
bidirectional printing” ( P.2-36).
6
Head Cleaning
Referring to “Head Cleaning” ( P.2-32).
4
Test Feeding
Referring to “Test Feeding” ( P.2-29).
Printing Data
Referring to “Printing Data” ( P.2-38).
8