6-2
Specifications
Machine specifications
Item Specifications
Print head
Method Drop-on-demand piezoelectric print heads
Specification 6 heads: 3-layered staggered arrangement in 2-line
Drawing mode
(scan x feed)
4 colors
300x450HQ : Bi/Uni 3/6/12 pass (only normal mode)
600x600 : Bi/Uni 4/8/16 pass
600x900 : Bi/Uni 6/12/24 pass
4 colors + White
6 colors + White
300x450HQ : Bi/Uni 6/12/24 pass
600x600 : Bi/Uni 8/16/32 pass
600x900 : Bi/Uni 12/24/48 pass
Usable inks LUS-150 ink (M,C,Y,K,W) / LUS-200 ink (M,C,Y,K)
Ink supply
Supplying 2L x 8 bottles (For 4-color, UISS switching is available, for 4-color +
white, UISS switching is available only for M, C.)
Capacity of ink
bottle
4 colors 2L-bottle x 2 for each color
4 colors + White
M, C, W : 2L-bottle x 2 for each color Y, K : 2L-bottle x 1 for each color
6 colors + White
W : 2L-bottle x 2 Other than W: 2L-bottle x 1 for each color
Media type Weatherproof PVC/ Clear film (Use of LUS-200 ink is not recommended.)
Max. printing width 1610mm
Roll Media size
Maximum 1620mm
Minimum 297mm
Thickness 1 mm or less
Roll outside diameter
When using VTTS and feeding unit : Φ300mm or less
When using narrow take-up device : Φ180mm or less
Roll weight
*1
When using VTTS and feeding unit : 60kg or less
When using narrow take-up device : 18kg or less
Roll inside diameter
When using VTTS and feeding unit : 3 inches
When using narrow take-up device : 2 or 3 inches
Printing surface Regardless of inside and outside
Roll end treatment
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for easy removal.
Leaf media size
Maximum 1620mm
Minimum 297mm
Margin
Leaf media Left end and right end : 15 mm (Default) Front : 150.0 mm Rear : 800 mm
Roll media Left end and right end : 15 mm (Default) Front : 150.0 mm Rear : 0 mm
Distance accu-
racy
Absolute accuracy Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Reproducibility Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Perpendicularity ± 0.5 mm / 1000 mm
Media skew 5 mm or less / 10 m variable
Head height adjustment 1.5mm to 7mm Single-step user setting (media thickness automatic recognition)
Cutting of media
Cutting of Y direction by the head cutter,
Cutting accuracy (steps) : 1.0 mm or less.
Media delivery
Take-up device supplied as a standard accessory
(switching possible between face in and face out
*2
).
Waste ink tank Bottle type (3,200 cc)/ Detected by sensor
Interface USB 2.0
Command MRL- III
Noise
*3
during standby Less than 58 dB (FAST-A, Front & Rear & Left & Right 1 m)
during continuous printing
Less than 65 dB
during discontinuous printing
Less than 70 dB
Safety Standard
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC,Low Voltage Direc-
tive,Machinery Directive), CB Report, RoHS
Power AC200 - 240 ± 10% , 50/60Hz ± 1Hz , 29A or less
Power consumption
*4
7200 W or less
Recomended
Environment
Available temp. 20 °C to 30 °C (68°F to 86°F)
Humidity 35 to 65% Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C (68°F to 77°F)
Temperature change ± 10 °C / h or less
Dust 0.15mg/m
3
(Equivalent to normal office level)
Highest operation height
2000 m
To Next Page
Loading...
