2-37
1
2
Basic Operations
4
5
6
Correct the ink drop position for bidirectional printing
8
By pressing the key, register the correction value.
• The screen to correct the next pattern is displayed. Repeat the
procedures from the Step 9 to correct all patterns.
• After correcting all patterns, perform the procedures in the Step 7.
9
Press the key several times to end the setting.
Performing to correct the dot position without key
You can select “DROP.POScorrect” by using the key in the Local without pressing the
key.
Press the
key in Local.
Press to
select [SETUP], and
press the key.
Press to select [DROP.POScorrect],
and press the key twice.
• The screen in the Step 3 is displayed. Perform
the procedures from the Step 4.
To Next Page
Loading...
