3-3
1
1
3
Convenient use
5
6
List of Functions
MAPS
( P.3-13)
OFF/MAPS1/MAPS2 MAPS2
Perform setting to reduce
stripes between passes.
MAPS1
PRINT SPEED
ADJUST
-50 to +50% 0%
MAPS2
AUTO
MANUAL
PATTERN(1 to 5)/
Smoothing level (AUTO/5
to 100%)
AUTO
CLEANING
(P.3-18)
OFF, PAGE,
LENGTH, TIME
OFF
Sets the automatic cleaning
operation for the head
performed before printing or
during printing.
PAGE
INTERVAL
1 to 1000 page 1
page
TYPE NORMAL / SOFT / HARD
SOFT
LENGTH
INTERVAL
0.1 to100.0m 0.5m
TYPE NORMAL / SOFT / HARD
SOFT
TIME
INTERVAL
10 to 120 min
10 min
TYPE NORMAL / SOFT / HARD
SOFT
INTERVAL WIPING
( P.3-19)
3 to 255 minutes
, OFF OFF
Sets the wiping operation
during printing.
HEAD GAP ( P.2 - 5 )
1.5 to 7.0mm 2.0 mm
Sets the head gap.
*1. This is the setting value to be used for printing when setting value is not specified at the RIP software (host) side, or, you give priority
to the setting value at the machine side, even if you set “Host” to the type registration of this machine.
*2. When you set this to “100%” or more, required time for completion of printing will be shortened. However, enough drying time cannot
be ensured and it may affect the image quality.
Function name Set value Default
When no instruction
from RIP exists
*1
Outline
To Next Page
Loading...
