MIMAKI UJV500-160 - Page 86

3-10
Changing the lighting pattern of Post cure UV lamps
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [UV MODE].
4
Press the key.
5
Press to select [PATTERN].
6
Press the key.
7
Press to select [MANUAL].
• To print at the intensity set in the printer, select [MANUAL].
8
Press the key.
9
Press to select [POY CURE UV LAMP].
10
Press the key.
11
Press to set the lighting pattern of Post
cure UV lamps.
• Set the lighting patterns of each of Post cure UV lamps of the top,
middle and bottom.
12
Press the key.
13
Press the key several times to end the setting.
FUNCT I ON
SETUP [ ENT ]
SETUP
FEED COMP . [ ENT ]
SETUP
UV MODE [ ENT ]
UV MODE
:PATTERN
UV MODE
:PATTERN
UV MODE
:HOST
UV MODE
:MNUAL
UV MODE
:LED-UV LAMP
UV MODE
: POST CURE UV L AMP
UV MODE
:ON ON ON
UV MODE
:ON ON ON
Top
Middle Bottom
SETUP
UV MODE [ ENT ]