3-17
1
1
3
Convenient use
5
6
Perform setting to reduce stripes between passes
8
Press and select pattern and
color to be printed.
• ：Select the Pattern1 to Pattern 5.
• ：Select color(COLOR or SPOT(special color))
9
Press the key.
10
Press to change the smoothing level and
color.
• Set Value:AUTO, 5 to 100% (set in units of 5%)
• AUTO : Set the smoothing level automatically depending on printing mode.
• 5 to 100% :
The MAPS2 effect become strong as the set value increase, and become weak as the set value
decrease.
• ：Select the smoothing level.
• ：Select color(COLOR or SPOT(special color))
11
Press the key.
12
Press the key several times to end the setting.
• MAPS2 effect differs depending on image to be printed. Change the printing pattern and
use it after checking effect in advance.
To Next Page
Loading...
