2. Product presentation
MiR100 Hook User Guide (en) 10/2020 - v.3.0 ©Copyright 2016-2020: Mobile Industrial Robots A/S. 18
The control panel buttons
Figure 2.5. The MiR100 Hook control panel.
Pos. Description Pos. Description
1 Scanner reset 2 Power
Table 2.1.
MiR100 Hook control panel.
Scanner reset button
Pressing this button restarts the scanners. This can be useful if the robot goes into
Emergency stop and you wish to resume operations.
Power
Pressing this button for three seconds turns the robot on or shuts it off.
Operating modes
MiR100 Hook has two operating modes: Manual mode and Autonomous mode.
To Next Page
Loading...
