Get the
Motion CPU
serial No.
Receive the Motion CPU serial No.
Check the serial No. of the Motion CPU
to write the license key.
Send the serial No. (e-mail etc.)
Receive the license key.
Send the license key (e-mail etc.)
Insert USB dongle in personal computer.
Refer to the following for checking the serial No. (product information).
¢
MELSEC iQ-R Motion Controller User’s Manual
Purchase the add-on library license.
START
If a license is purchased, a USB license key (USB dongle with
license information) is supplied.
: Operation on personal computer A (license key generation)
: Operation on personal computer B (license key write)
Startup the system, and operate the
add-on library.
Install the operating system software
and add-on library.
Refer to the add-on library instruction manual.
Generate
license
key offline
Perform the following in MT
Developer2.
*1
• Select add-on library.
• Select Motion CPU model.
• Set Motion CPU serial No.
• Generate license key.
• Export the license key to file.
Use the set serial No. (product information) to generate the license key.
(1)
License key
writing
Connect the personal computer and
Motion CPU.
Turn ON the power supply of Multiple
CPU system.
Put the Motion CPU in installation mode.
Set the Motion CPU rotary switch to "A".
Refer to the following for details on rotary switch.
¢
MELSEC iQ-R Motion Controller User’s Manual
In the transfer setup, set the connection
(communication) method for the
personal computer and Multiple CPU
system.
License
purchase
To Next Page
Loading...
