6 - 78
6.12 Writing in Program during CPU Module RUN
6.12.1 Online change in ladder mode
6
FUNCTIONS
Also, online change is enabled from GX Developer connected to another station on
the network.
(2) Memory enabled for online change
(a) Basic model QCPU, High Performance model QCPU, Process CPU, and
Redundant CPU
The memory enabled for online change is the program memory.
(b) Universal model QCPU
The memory enabled for online change is the program cache memory (program
memory).
(3) Number of steps enabled for online change at once
A maximum of 512 steps can be written at once during RUN.
Figure 6.52 Outline of online change via network
MELSECNET/H PLC
to PLC network
Change by GX Developer and
write in CPU module at the
conversion.
GX Developer
To Next Page
Loading...
Need help?
General
