9 - 38
9.3 Network Parameters
9
PARAMETERS
(3) Ethernet setting
The network parameter of the Ethernet network is set.
* 1 : Can be set only when the Redundant CPU is used.
Figure 9.29 Number of modules on Ethernet/CC IE/MELSECNET. (for Ethernet setting)
Table9.33 Ethernet setting list
Item Parameter No. Description Setting range Default value Reference
Nunber of Ethernet 9000H
Set the Ethernet network
parameters.
Refer to the manual for the Q
corresponding Ethernet.
---- ----
Starting I/O No.
9N00
H
Network No.
Group No.
Station No.
Operational settings
Initial settings 9N01H
Open settings 9N02H
Router relay parameter 9N03H
Station No.<->IP
information
9N05
H
FTP parameters 9N06H
E-mail settings 9N07H
News setting 9N08H
Interrupt settings 9N09H
Redundant settings
*1
D9**H
Routing parameters 9N04H
Group setting
*1
D004H
To Next Page
Loading...
Need help?
General
